ACO Brickslot 100 Type 443 Stainless Steel Slot-Top - 1 Meter

Product Details: ACO Brickslot 100 Type 443 Stainless Steel Slot-Top - 1 Meter

The ACO Brickslot 100 series replaces a conventional grate with a discreet slot-top for the KlassikDrain K100 and KS100 trench drain system. Fabricated from 11 gauge steel, each unit fits directly into the channel's grate recess and presents only a narrow drainage slot at the finished surface. Brick pavers fit directly against the slot — the units are designed for 80 mm pavers including 1/8" (3 mm) of bedding — so stormwater is captured along an almost seamless line in plazas, walkways, and other commercial spaces where unobtrusive drainage is essential.

Rated to EN 1433 Load Class C, Brickslot 100 installs without bolts or locking hardware and pairs with K100/KS100 channels as well as Series 900 catch basins. The range spans galvanized and stainless steel construction, standard and heel-resistant slot geometries, 1 meter and 0.5 meter lengths, and half-meter access units that keep the covered system serviceable.

The Type 443 (ACO part number 138045) is the standard-slot stainless steel unit of the range in a 1 meter (39.37") length. Fabricated from 11 gauge stainless steel, it presents a single offset slot with a nominal 1/2" (12 mm) clear opening — the offset helps prevent debris from becoming trapped, and the slot is nearly invisible in paver or brick paving. The 17.6 lb unit rests in the channel grate seating without bolts or locking hardware: anti-shunt lugs prevent lateral movement, and the weight of the covering material secures it in place. It is ADA Compliant, Bicycle Safe, and LEED, and carries an EN 1433 Load Class C rating of 56,202 lbs (774-1,160 PSI).

Quick Look

• Brickslot Type 443 standard stainless steel slot-top — ACO part number 138045
• Length: 39.37" (1000 mm) — 1 meter section
• Material: 11 gauge stainless steel (the Brickslot 100 range is also available in galvanized steel)
• Single offset slot with a nominal 1/2" (12 mm) clear opening — the offset helps prevent debris from becoming trapped, and the slot is nearly invisible in paver/brick paving
• Weight: 17.6 lbs
• Load Class: EN 1433 Load Class C (56,202 lbs, 774-1,160 PSI)
• Fits directly into the K100/KS100 channel grate recess, replacing a standard grate
• Unit Width: 4.84" (123 mm); Unit Height: 3.27" (83 mm); adds 4.06" (103 mm) above the overall channel depth
• Designed for 80 mm brick pavers including 1/8" (3 mm) bedding — pavers fit directly against the slot
• No DrainLok or QuickLok hardware — the unit rests in the channel grate seating, anti-shunt lugs prevent lateral movement, and the weight of the covering material secures it
• For use with K100/KS100 channels and Series 900 catch basins; also usable with MembraneDrain and SlabDrain (H100-10 / H100-8 / H100K-8) channels
• End caps and accessories available from the K100 range
• ADA Compliant, Bicycle Safe, and LEED

Shop the complete ACO KlassikDrain K100 Trench Drain system

Additional Resources