ACO KlassikDrain K2-30 Sloped Trench Drain Channel - Galvanized Steel Rail - 1 Meter
For personalized assistance or a customized quote, be sure to call us directly at (803)-324-3225. Our team of experts is on standby to assist you with any questions you may have about our products.
Product Details: ACO KlassikDrain K2-30 Sloped Trench Drain Channel - Galvanized Steel Rail - 1 Meter
The ACO KlassikDrain K2 channel is a modular 7.87" (200 mm) clear-width trench drain section molded from high-strength polyester polymer concrete. Its galvanized steel edge rail is cast into the body, while the partial-radius invert, interlocking male/female ends, and exterior anchoring keys support smooth hydraulics and accurate installation. Numbered sections add a 0.5% built-in slope when installed in sequence.
The K2-30 (ACO part 75030) is a 1 meter numbered sloped section with female-to-male invert of 13.58-13.78" (345-350 mm). Its overall depth is 14.57-14.76" (370-375 mm), and its published weight is 115.5 lbs. Install it in numerical sequence with the other K2 channels to preserve the 0.5% built-in fall. ACO casts 4" and 6" round bottom outlet knockouts into this section.
Quick Look
- Catalog Code: K2-30 — ACO Part Number: 75030
- Length: 39.37" (1000 mm); Internal Width: 7.87" (200 mm); Overall Width: 10.24" (260 mm)
- Invert Depth: 13.58-13.78" (345-350 mm); Overall Depth: 14.57-14.76" (370-375 mm)
- Published Weight: 115.5 lbs
- 0.5% built-in slope; install numbered channels in ascending sequence
- Bottom outlet knockouts: 4" and 6" round
- High-strength polyester polymer concrete: minimum 14,000 psi compressive strength, 4,000 psi flexural strength, and 0.07% water absorption
- Integrally cast galvanized steel edge rail; 0.50" (13 mm) minimum channel wall thickness
- Frost proof, salt proof, and resistant to dilute acids and alkalis
- Partial-radius channel bottom, male-to-female end profile, and exterior cast-in anchoring keys
- Compatible with the shared K200/KS200 grate range; realized load class depends on the selected grate, up to EN 1433 Class E
- Sequential sloped sections provide up to 131'-3" (40 m) of continuous fall; neutral sections extend the run
- QuickLok boltless locking uses the line-specific locking bar; DrainLok grates lock without a separate bar
Shop the complete ACO K200 trench drain line
Additional Resources
ACO Specification Sheet 1ACO Drain Installation Manual 2
| Brand | ACO |
|---|---|
| Part Number | 75030 |
| Length | 39.37" |
| Width | 10.24" |
| Height | 14.57-14.76" |