ACO KlassikDrain K1-30 Sloped Trench Drain Channel with Bottom Knockout - 1 Meter

Product Details: ACO KlassikDrain K1-30 Sloped Trench Drain Channel with Bottom Knockout - 1 Meter

The ACO KlassikDrain K100 sloped channel series (K1-1 through K1-40) forms the backbone of the K100 trench drain system: one-meter modular channel sections cast from high-strength polyester polymer concrete with an integrally cast-in galvanized steel edge rail. Each section carries a 0.5% built-in slope, so installing the numbered sections in sequence produces up to 131'-3" (40 m) of continuously falling trench — 1/17" of fall per linear foot — without stepping or regrading the sub-base. The compact 4" (100 mm) internal clear width, partial-radius trench bottom, and male-to-female interconnecting end profile deliver efficient hydraulics and fast, accurate installation across commercial and industrial drainage projects, from industrial areas and gas stations to zones with light commercial forklift traffic. Pair it with any grate from the shared K100/KS100 range to match the expected traffic load, up to EN 1433 Load Class E.

The K1-30 (ACO part number 74030) sits toward the deep end of the sloped run and is one of the every-fifth sections cast with a bottom knockout. Its invert falls from 9.65" (245 mm) at the inlet (female) end to 9.84" (250 mm) at the outlet (male) end, with an overall body depth of 10.43-10.63" (265-270 mm) and a weight of 51.4 lbs. The pre-formed 4" round / 6" oval bottom knockout lets this section discharge straight down into the site piping: the 4" knockout pairs with debris strainer part 93488, and outlet adapter part 95140 (4" oval to 6" round) is also available. At the same depth, the outlet invert matches the K1-030 / K1-0303 neutral (constant-depth) channels for extending runs, as well as the 9.84" (250 mm) invert served by the 304-6 / 308-6 6" oval end caps.

Quick Look

• ACO Part Number: 74030 (K1-30)
• Section 30 of the sequential K1-1 to K1-40 sloped run — one of the every-fifth channels supplied with a bottom knockout
• Invert Depth: Inlet (female) 9.65" (245 mm) -> outlet (male) 9.84" (250 mm)
• Overall Body Depth: 10.43-10.63" (265-270 mm)
• Weight: 51.4 lbs
• Bottom Knockout: pre-formed 4" round / 6" oval outlet in the channel bottom
• The 4" bottom knockout pairs with debris strainer part 93488; outlet adapter part 95140 (4" oval to 6" round) is also available
• Outlet invert matches the K1-030 / K1-0303 neutral (constant-depth) channels and the 9.84" (250 mm) invert served by the 304-6 / 308-6 6" oval end caps
• Channel Length: 39.37" (1 m) sloped section with 0.5% built-in slope (1/17" of fall per linear foot)
• Internal Width: 4" (100 mm) nominal clear opening; Overall Width: 5.12" (130 mm)
• Material: High-Strength Polyester Polymer Concrete — compressive strength 14,000 psi, flexural strength 4,000 psi, water absorption 0.07%
• Frost proof, salt proof, and resistant to dilute acids and alkalis
• Rail Material: Galvanized Steel Edge Rail, integrally cast in, at least 3/32" (2.5 mm) thick
• Wall thickness at least 0.50" (13 mm)
• Load Recommendation: up to EN 1433 Load Class E (134,885 lbs, 2,785 psi) — a system rating that depends on the grate fitted
• Connection to Grating: QuickLok boltless locking (K1 QuickLok locking bar, part 02899); DrainLok grates require no locking bar
• Grates are shared across K100 and KS100 — one grate part number fits either edge-rail material
• Male-to-female interconnecting end profile with a partial-radius trench bottom for smooth hydraulics
• Horizontal cast-in anchoring keys on the outside walls bond the channel to the surrounding bedding and pavement
• Channel numbers and flow-direction arrows are cast into each unit; each end indicates the number of the channel that connects to it
• Sequential K1-1 to K1-40 sections build up to 131'-3" (40 m) of continuous slope; neutral (constant-depth) channels can be inserted to extend runs
• Bottom knockouts (4" round / 6" oval) are provided on every fifth channel in the run (K1-5, K1-10, K1-15 … K1-40)
• After removing the grates and QuickLok bar there is uninterrupted access to the trench for maintenance
• Manufactured to EN 1433 standards; guide specification references ASME A112.6.3, Floor and Trench Drains

Shop the full ACO KlassikDrain K100 Trench Drain system

Additional Resources