ACO KlassikDrain KS3-010 Neutral Trench Drain Channel - Grade 304 Stainless Steel Rail - 1 Meter
For personalized assistance or a customized quote, be sure to call us directly at (803)-324-3225. Our team of experts is on standby to assist you with any questions you may have about our products.
Product Details: ACO KlassikDrain KS3-010 Neutral Trench Drain Channel - Grade 304 Stainless Steel Rail - 1 Meter
The ACO KlassikDrain KS3 channel is a modular 11.81" (300 mm) clear-width trench drain section molded from high-strength polyester polymer concrete. Its grade 304 stainless steel edge rail is cast into the body, while the partial-radius invert, interlocking male/female ends, and exterior anchoring keys support smooth hydraulics and accurate installation. Neutral sections add length without adding fall.
The KS3-010 (ACO part 76443) is a 1 meter zero-slope section with a constant invert of 13.78" (350 mm). Its overall depth is 14.57" (370 mm), and its published weight is 143.4 lbs. Because both ends remain at the same elevation, it extends or fine-tunes a run without adding fall. ACO casts 6" and 8" round bottom outlet knockouts into this section.
Quick Look
- Catalog Code: KS3-010 — ACO Part Number: 76443
- Length: 39.37" (1000 mm); Internal Width: 11.81" (300 mm); Overall Width: 14.17" (360 mm)
- Invert Depth: 13.78" (350 mm); Overall Depth: 14.57" (370 mm)
- Published Weight: 143.4 lbs
- Neutral, constant-depth section: female and male inverts are equal
- Bottom outlet knockouts: 6" and 8" round
- High-strength polyester polymer concrete: minimum 14,000 psi compressive strength, 4,000 psi flexural strength, and 0.07% water absorption
- Integrally cast grade 304 stainless steel edge rail; 0.50" (13 mm) minimum channel wall thickness
- Frost proof, salt proof, and resistant to dilute acids and alkalis
- Partial-radius channel bottom, male-to-female end profile, and exterior cast-in anchoring keys
- Compatible with the shared K300/KS300 grate range; realized load class depends on the selected grate, up to EN 1433 Class E
- Sequential sloped sections provide up to 131'-3" (40 m) of continuous fall; neutral sections extend the run
- QuickLok boltless locking uses the line-specific locking bar; DrainLok grates lock without a separate bar
Shop the complete ACO K300 trench drain line
Additional Resources
ACO Specification Sheet 1ACO Drain Installation Manual 2
| Brand | ACO |
|---|---|
| Part Number | 76443 |
| Length | 39.37" |
| Width | 14.17" |
| Height | 14.57" |