ACO Brickslot 100 Type 444 Stainless Steel Slot-Top - 0.5 Meter

Product Details: ACO Brickslot 100 Type 444 Stainless Steel Slot-Top - 0.5 Meter

The ACO Brickslot 100 series replaces a conventional grate with a discreet slot-top for the KlassikDrain K100 and KS100 trench drain system. Fabricated from 11 gauge steel, each unit fits directly into the channel's grate recess and presents only a narrow drainage slot at the finished surface. Brick pavers fit directly against the slot — the units are designed for 80 mm pavers including 1/8" (3 mm) of bedding — so stormwater is captured along an almost seamless line in plazas, walkways, and other commercial spaces where unobtrusive drainage is essential.

Rated to EN 1433 Load Class C, Brickslot 100 installs without bolts or locking hardware and pairs with K100/KS100 channels as well as Series 900 catch basins. The range spans galvanized and stainless steel construction, standard and heel-resistant slot geometries, 1 meter and 0.5 meter lengths, and half-meter access units that keep the covered system serviceable.

The Type 444 (ACO part number 138046) is the standard-slot stainless steel Brickslot in a 0.5 meter (19.69") length. Fabricated from 11 gauge stainless steel, it presents a single offset slot with a nominal 1/2" (12 mm) clear opening — the offset helps keep debris from being trapped, and the slot line is nearly invisible in paver and brick paving. The unit measures 4.84" (123 mm) wide by 3.27" (83 mm) high, adds 4.06" (103 mm) above the overall channel depth, and weighs 9.0 lbs. Rated EN 1433 Load Class C (56,202 lbs, 774-1,160 PSI), it is ADA Compliant, Bicycle Safe, and supports LEED credits. There is no DrainLok or QuickLok hardware: the unit rests in the channel grate seating, anti-shunt lugs prevent lateral movement, and the weight of the covering material secures it.

Quick Look

• Type 444 standard-slot stainless steel Brickslot — ACO part number 138046
• Length: 19.69" (500 mm) — 0.5 meter section
• Unit Width: 4.84" (123 mm); Unit Height: 3.27" (83 mm); adds 4.06" (103 mm) above the overall channel depth
• Material: 11 gauge stainless steel (Brickslot 100 range available in galvanized and stainless steel versions)
• Single offset slot with a nominal 1/2" (12 mm) clear opening — the offset helps keep debris from being trapped; nearly invisible in paver/brick paving
• Weight: 9.0 lbs
• Load Class: EN 1433 Load Class C (56,202 lbs, 774-1,160 PSI)
• Fits directly into the K100/KS100 channel grate recess, replacing a standard grate
• Designed for 80 mm brick pavers including 1/8" (3 mm) bedding — pavers fit directly against the slot
• No DrainLok or QuickLok hardware — the unit rests in the channel grate seating, anti-shunt lugs prevent lateral movement, and the weight of the covering material secures it
• For use with K100/KS100 channels and Series 900 catch basins; also usable with MembraneDrain and SlabDrain (H100-10 / H100-8 / H100K-8) channels
• End caps and accessories available from the K100 range
• ADA Compliant, Bicycle Safe, and LEED

Shop the complete ACO KlassikDrain K100 Trench Drain system

Additional Resources