ACO Drain Direction Change Fabrication - Shortened Channels & Male/Female Details Remodeled (K100/S100K)

Product Details: ACO Drain Direction Change Fabrication - Shortened Channels & Male/Female Details Remodeled (K100/S100K)

Standard modular parts cover most ACO KlassikDrain K100 trench runs — but not all of them. For layouts that call for a shortened section, a change of direction, a mitered 90° corner, a tee intersection, or an outlet where no factory knockout exists, ACO offers a made-to-order fabrication service for its polymer concrete channel systems. Each product here is that shop work itself: a fabrication ordered together with the channel sections it is performed on — cut, bonded, core-drilled, or remodeled at the factory to match your project drawings.

On most fabrications, the male-to-female connection details are remodeled so the finished piece drops into a standard channel run; depending on the service, parts ship assembled or as un-assembled sections for alignment on site. Because every fabrication is configured to a specific layout, these services are quoted per project — send us your drawings and our team will handle the rest.

This listing covers a change of direction built from shortened channel sections: the channels in your order are shortened at the factory and their male/female connection details are remodeled, so the finished configuration turns the run and still drops into standard channel sections. Per ACO, shortened channels require 2 channels for a direction change — the configuration uses 2 channels and 1 frame. The service covers the ACO Drain K100 and S100K channel lines.

Quick Look

• Made-to-order fabrication service performed by ACO — shop labor applied to the channel sections in your order, not a stocked, off-the-shelf part
• Ordered alongside the KlassikDrain channel material it is applied to; channel sections, grates, and accessories are quoted separately
• Performed on high-strength polymer concrete channel bodies from ACO's 4" (100 mm) channel lines — each listing states its exact range of compatible ACO channel systems
• Fabricated sections are designed to integrate with the standard K100 male-to-female interconnecting end profile
• Configuration is confirmed against your trench run layout at quoting, so the fabrication matches the channels it joins
• Quote-only service: request a quote with your layout and the channel sections involved, and our team will confirm the correct fabrication with ACO
• ACO Part Number: 06629
• Service: direction change with shortened channels — channel sections shortened and male/female connection details remodeled at the factory
• Configuration: shortened channels require 2 channels for a direction change — this service uses 2 channels and 1 frame
• Compatible ACO Drain channel lines: K100 and S100K

The shortened direction change is one of several made-to-order fabrications available for the KlassikDrain line. To pair it with the channel sections, grates, and accessories it is performed on, start with the system overview: