ACO Drain Type 900 Plastic Trash Bucket

Product Details: ACO Drain Type 900 Plastic Trash Bucket

A complete ACO KlassikDrain installation is more than channel and grate. The K100 (galvanized edge rail) and KS100 (stainless steel edge rail) systems are modular polymer concrete trench drains with a 4" (100 mm) internal width, engineered for commercial and industrial stormwater duty — and ACO backs the line with a full range of factory accessories that make each run easier to install, maintain, and keep in service. From trash buckets, bases, top sections, and risers for the Type 900 in-line and Series 600 catch basins, to locking bars, debris strainers, outlet adapters, installation devices, and Brickslot access spares, every accessory is a genuine ACO Drain part with its own ACO part number, made to fit its matching KlassikDrain component exactly. Selecting the correct part keeps the system performing the way ACO designed it — with grates that release for uninterrupted access to the trench for maintenance.

The Type 900 Plastic Trash Bucket (ACO part number 01498) is the debris basket for the KlassikDrain Type 900 in-line catch basins. Molded from polypropylene plastic, it collects the debris washed down from the trench run, and it is supported in the catch basin top so it does not create a vacuum or reduce outflow. A bucket is supplied inside every K1-901 and K1-906 catch basin assembly, and this listing offers the same genuine part separately as a service spare. Keep in mind that ACO publishes catch-basin flow rates without the bucket in place — using one reduces flow. The 12" Series 600 catch basins take a different bucket (part 98653 short or 98665 deep), and the K200 system bucket (part 13999) is not interchangeable with this one.

Quick Look

• Genuine ACO Drain factory accessory for the ACO KlassikDrain 100 series — the K100 (galvanized edge rail) and KS100 (stainless steel edge rail) 4" (100 mm) trench drain systems
• Every accessory carries its own ACO part number and is matched to specific components — confirm the catch basin series (Type 900 in-line vs. Series 600), channel configuration, or Brickslot unit it serves before ordering
• Complements the modular ACO KlassikDrain K100/KS100 polymer concrete channel system: 4" (100 mm) internal clear width, manufactured to EN 1433 standards, with system load ratings up to Class E depending on the grate fitted
• Sold individually as installation aids, service parts, and factory replacement spares for new and existing KlassikDrain installations
• Genuine ACO Drain factory spare part — ACO part number 01498
• Fits the ACO KlassikDrain Type 900 in-line catch basins: supplied inside the K1-901 and K1-906 assemblies and sold separately here as a replacement
• Collects debris washed down from the trench run so it can be removed during routine maintenance
• Supported in the catch basin top to avoid creating a vacuum and reducing outflow
• Material: polypropylene plastic molding
• Dimensions: 8.82" (224 mm) x 8.66" (220 mm) x 9.49" (241 mm) deep, with a 2.87" (73 mm) lip
• Weight: 1.1 lbs
• Note: ACO publishes catch-basin flow rates without the bucket installed — fitting one reduces flow
• Not for the 12" Series 600 catch basins (use part 98653 short or 98665 deep) and not interchangeable with the K200 trash bucket (part 13999)

Shop the full ACO KlassikDrain K100 Trench Drain system