ACO KlassikDrain K1-26 Sloped Trench Drain Channel - 1 Meter

Product Details: ACO KlassikDrain K1-26 Sloped Trench Drain Channel - 1 Meter

The ACO KlassikDrain K100 sloped channel series (K1-1 through K1-40) forms the backbone of the K100 trench drain system: one-meter modular channel sections cast from high-strength polyester polymer concrete with an integrally cast-in galvanized steel edge rail. Each section carries a 0.5% built-in slope, so installing the numbered sections in sequence produces up to 131'-3" (40 m) of continuously falling trench — 1/17" of fall per linear foot — without stepping or regrading the sub-base. The compact 4" (100 mm) internal clear width, partial-radius trench bottom, and male-to-female interconnecting end profile deliver efficient hydraulics and fast, accurate installation across commercial and industrial drainage projects, from industrial areas and gas stations to zones with light commercial forklift traffic. Pair it with any grate from the shared K100/KS100 range to match the expected traffic load, up to EN 1433 Load Class E.

The K1-26 (ACO part number 74026) is the twenty-sixth section in the K100 sloped run. Its invert runs from 8.86" (225 mm) at the inlet (female) end to 9.06" (230 mm) at the outlet (male) end, giving an overall body depth of 9.65"–9.84" (245–250 mm), and the section weighs 48.2 lbs. Install it downstream of K1-25 and follow with K1-27 in numbered sequence — the channel numbers and flow-direction arrows cast into each unit keep the layout simple on site. Note that this section has no bottom knockout: knockouts are provided on every fifth channel in the run.

Quick Look

• Catalog Code: K1-26 — ACO Part Number 74026
• Invert Depth: Inlet (female) 8.86" (225 mm) → Outlet (male) 9.06" (230 mm)
• Overall Depth: 9.65"–9.84" (245–250 mm)
• Weight: 48.2 lbs
• No bottom knockout on this section
• Channel Length: 39.37" (1 m) sloped section with 0.5% built-in slope (1/17" of fall per linear foot)
• Internal Width: 4" (100 mm) nominal clear opening; Overall Width: 5.12" (130 mm)
• Material: High-Strength Polyester Polymer Concrete — compressive strength 14,000 psi, flexural strength 4,000 psi, water absorption 0.07%
• Frost proof, salt proof, and resistant to dilute acids and alkalis
• Rail Material: Galvanized Steel Edge Rail, integrally cast in, at least 3/32" (2.5 mm) thick
• Wall thickness at least 0.50" (13 mm)
• Load Recommendation: up to EN 1433 Load Class E (134,885 lbs, 2,785 psi) — a system rating that depends on the grate fitted
• Connection to Grating: QuickLok boltless locking (K1 QuickLok locking bar, part 02899); DrainLok grates require no locking bar
• Grates are shared across K100 and KS100 — one grate part number fits either edge-rail material
• Male-to-female interconnecting end profile with a partial-radius trench bottom for smooth hydraulics
• Horizontal cast-in anchoring keys on the outside walls bond the channel to the surrounding bedding and pavement
• Channel numbers and flow-direction arrows are cast into each unit; each end indicates the number of the channel that connects to it
• Sequential K1-1 to K1-40 sections build up to 131'-3" (40 m) of continuous slope; neutral (constant-depth) channels can be inserted to extend runs
• Bottom knockouts (4" round / 6" oval) are provided on every fifth channel in the run (K1-5, K1-10, K1-15 … K1-40)
• After removing the grates and QuickLok bar there is uninterrupted access to the trench for maintenance
• Manufactured to EN 1433 standards; guide specification references ASME A112.6.3, Floor and Trench Drains

Additional Resources