ACO KlassikDrain K3-32 Sloped Trench Drain Channel - Galvanized Steel Rail - 1 Meter
For personalized assistance or a customized quote, be sure to call us directly at (803)-324-3225. Our team of experts is on standby to assist you with any questions you may have about our products.
Product Details: ACO KlassikDrain K3-32 Sloped Trench Drain Channel - Galvanized Steel Rail - 1 Meter
The ACO KlassikDrain K3 channel is a modular 11.81" (300 mm) clear-width trench drain section molded from high-strength polyester polymer concrete. Its galvanized steel edge rail is cast into the body, while the partial-radius invert, interlocking male/female ends, and exterior anchoring keys support smooth hydraulics and accurate installation. Numbered sections add a 0.5% built-in slope when installed in sequence.
The K3-32 (ACO part 76032) is a 1 meter numbered sloped section with female-to-male invert of 17.91-18.11" (455-460 mm). Its overall depth is 18.7-18.9" (475-480 mm), and its published weight is 169.9 lbs. Install it in numerical sequence with the other K3 channels to preserve the 0.5% built-in fall. This section does not contain a factory bottom outlet knockout; ACO provides them on each fifth sloped channel and on neutral sections.
Quick Look
- Catalog Code: K3-32 — ACO Part Number: 76032
- Length: 39.37" (1000 mm); Internal Width: 11.81" (300 mm); Overall Width: 14.17" (360 mm)
- Invert Depth: 17.91-18.11" (455-460 mm); Overall Depth: 18.7-18.9" (475-480 mm)
- Published Weight: 169.9 lbs
- 0.5% built-in slope; install numbered channels in ascending sequence
- No bottom knockout on this section
- High-strength polyester polymer concrete: minimum 14,000 psi compressive strength, 4,000 psi flexural strength, and 0.07% water absorption
- Integrally cast galvanized steel edge rail; 0.50" (13 mm) minimum channel wall thickness
- Frost proof, salt proof, and resistant to dilute acids and alkalis
- Partial-radius channel bottom, male-to-female end profile, and exterior cast-in anchoring keys
- Compatible with the shared K300/KS300 grate range; realized load class depends on the selected grate, up to EN 1433 Class E
- Sequential sloped sections provide up to 131'-3" (40 m) of continuous fall; neutral sections extend the run
- QuickLok boltless locking uses the line-specific locking bar; DrainLok grates lock without a separate bar
Shop the complete ACO K300 trench drain line
Additional Resources
ACO Specification Sheet 1ACO Drain Installation Manual 2
| Brand | ACO |
|---|---|
| Part Number | 76032 |
| Length | 39.37" |
| Width | 14.17" |
| Height | 18.7-18.9" |