ACO KlassikDrain KS3-14 Sloped Trench Drain Channel - Grade 304 Stainless Steel Rail - 1 Meter
For personalized assistance or a customized quote, be sure to call us directly at (803)-324-3225. Our team of experts is on standby to assist you with any questions you may have about our products.
Product Details: ACO KlassikDrain KS3-14 Sloped Trench Drain Channel - Grade 304 Stainless Steel Rail - 1 Meter
The ACO KlassikDrain KS3 channel is a modular 11.81" (300 mm) clear-width trench drain section molded from high-strength polyester polymer concrete. Its grade 304 stainless steel edge rail is cast into the body, while the partial-radius invert, interlocking male/female ends, and exterior anchoring keys support smooth hydraulics and accurate installation. Numbered sections add a 0.5% built-in slope when installed in sequence.
The KS3-14 (ACO part 76414) is a 1 meter numbered sloped section with female-to-male invert of 14.37-14.57" (365-370 mm). Its overall depth is 15.16-15.35" (385-390 mm), and its published weight is 148.2 lbs. Install it in numerical sequence with the other KS3 channels to preserve the 0.5% built-in fall. This section does not contain a factory bottom outlet knockout; ACO provides them on each fifth sloped channel and on neutral sections.
Quick Look
- Catalog Code: KS3-14 — ACO Part Number: 76414
- Length: 39.37" (1000 mm); Internal Width: 11.81" (300 mm); Overall Width: 14.17" (360 mm)
- Invert Depth: 14.37-14.57" (365-370 mm); Overall Depth: 15.16-15.35" (385-390 mm)
- Published Weight: 148.2 lbs
- 0.5% built-in slope; install numbered channels in ascending sequence
- No bottom knockout on this section
- High-strength polyester polymer concrete: minimum 14,000 psi compressive strength, 4,000 psi flexural strength, and 0.07% water absorption
- Integrally cast grade 304 stainless steel edge rail; 0.50" (13 mm) minimum channel wall thickness
- Frost proof, salt proof, and resistant to dilute acids and alkalis
- Partial-radius channel bottom, male-to-female end profile, and exterior cast-in anchoring keys
- Compatible with the shared K300/KS300 grate range; realized load class depends on the selected grate, up to EN 1433 Class E
- Sequential sloped sections provide up to 131'-3" (40 m) of continuous fall; neutral sections extend the run
- QuickLok boltless locking uses the line-specific locking bar; DrainLok grates lock without a separate bar
Shop the complete ACO K300 trench drain line
Additional Resources
ACO Specification Sheet 1ACO Drain Installation Manual 2
| Brand | ACO |
|---|---|
| Part Number | 76414 |
| Length | 39.37" |
| Width | 14.17" |
| Height | 15.16-15.35" |