ACO Drain Shortened Channel Fabrication - Cut & Male/Female Details Remodeled (K100/KS100)

Product Details: ACO Drain Shortened Channel Fabrication - Cut & Male/Female Details Remodeled (K100/KS100)

Standard modular parts cover most ACO KlassikDrain K100/KS100 trench runs — but not all of them. For layouts that call for a shortened section, a change of direction, a mitered 90° corner, a tee intersection, or an outlet where no factory knockout exists, ACO offers a made-to-order fabrication service for its polymer concrete channel systems. Each product here is that shop work itself: a fabrication ordered together with the channel sections it is performed on — cut, bonded, core-drilled, or remodeled at the factory to match your project drawings.

On most fabrications, the male-to-female connection details are remodeled so the finished piece drops into a standard channel run; depending on the service, parts ship assembled or as un-assembled sections for alignment on site. Because every fabrication is configured to a specific layout, these services are quoted per project — send us your drawings and our team will handle the rest.

This listing covers the base shortening operation for a KlassikDrain run: a channel section in your order is cut at the factory to a less-than-standard length, and the male/female connection details are remodeled so the shortened piece still drops into a standard channel run. The service covers the ACO Drain K100, KS100, K50, and H100K channel lines, and it is also the prerequisite operation for ACO's shortened corner and shortened tee fabrications.

Quick Look

• Made-to-order fabrication service performed by ACO — shop labor applied to the channel sections in your order, not a stocked, off-the-shelf part
• Ordered alongside the KlassikDrain channel material it is applied to; channel sections, grates, and accessories are quoted separately
• Performed on high-strength polymer concrete channel bodies from ACO's 4" (100 mm) KlassikDrain K100/KS100 line — each listing states its exact range of compatible ACO channel systems
• Fabricated sections are designed to integrate with the standard K100/KS100 male-to-female interconnecting end profile
• Configuration is confirmed against your trench run layout at quoting, so the fabrication matches the channels it joins
• Quote-only service: request a quote with your layout and the channel sections involved, and our team will confirm the correct fabrication with ACO
• ACO Part Number: 06627
• Service: shortened channel — a channel section cut at the factory to a less-than-standard length, with the male/female connection details remodeled
• Compatible ACO Drain channel lines: K100, KS100, K50, and H100K
• Prerequisite operation for ACO's shortened corner and shortened tee fabrications

The shortened channel is one of several made-to-order fabrications available for the KlassikDrain line. To pair it with the channel sections, grates, and accessories it is performed on, start with the system overview: